Tuesday, November 10, 2009

More Pictures and Work Update

So since we have a lot of new pictures to share, we will updated on this last weekend and then get to the pictures

So on Sunday we installed the new beefy sway bar and replaced the rear shocks, that gets us through most of the parts we picked up so far. We still need to install the new temp sender, and the transmission cooler, but most of the suspension upgrades are done. Though after we installed the rear shocks, we are going to look in to doing the front since they are now not as good as the rear.

Now for the Pictures: 

So here are the old rusted lug-nuts that were a pain to get off the car.


Here is the new beefy sway bar





Here is the new beefy sway bar sanded and painted


 

Here is the new beefy swaybar and the old swaybar


 

The old rear shock and the newer rear shock



 Some Pictures of Bob and Duffy working on the car


 

The new and old upper motor mount or dog bone




The front tires with the car badges on them



And lastly our new favorite parts maker


Wednesday, November 4, 2009

Leaf Blower Forced Induction?


So in one of the many e-mails the team has sent back and forth some how a leaf blower came up. We briefly talked about doing some sort of ghetto-charging using a leaf blower and how we could most-likely could get one for cheap at Harbor Freight (They seem to have just about everything).



I did a little googleing and found this video;


I also found a product called the e-ram that is an high powered electric fan that activates at WOT (wide open throttle) providing about 1psi of boost.  http://www.electricsupercharger.com/products-eram.html

The e-ram is way out of our budget, and what fun is it to install some pre-made system like that when you can try and build your own.

There are then two options that I have come up with;

1. find a cheap leaf blower and find a way to power it.
2. find a high powered DC fan that would fit in the existing air system.

I'v not ever opened up an electric leaf blower but I don't imagine that the motor inside is a DC motor so we would need a transformer.  Not that big a deal but would increase the cost of the project. While the leaf blower would be cool and we might even need to cut a hole in the hood for it. The DC fan solution I think would be easier.
Since the car electronics are 12v DC a 12v fan would be the easiest to wire-up, but we could make or buy DC to DC up converters to get us to 24v or greater.  PC case fans might be the best place to start looking for 12v DC fans,


The problem might be finding one that creates enough air flow to make a difference.
So something like this;



Might be better and provide enough air flow, and still require us to make a hole in the hood to get it to fit.

Getting the whole system to work electricly in the car is something  I will get into in a later post.



 

Monday, November 2, 2009

Some Forward Progress

So we made some steps forward this weekend. Saturday we removed the rusted out power steering line, Bob cleaned up the new beefy swaybar, we removed all of the bad lug nuts, and cleaned up some of the rust under the car.
Sunday, with the assistance of Pete we installed the new power steering line, filled and bleed the system and luckily didn't create and new leaks. We also removed the existing wimpy swaybar, and put some new lug nuts on the tires.
We also got the parts we need to install the new beefy swaybar, and the temp sender, so the gauge on our new cluster will work. Hopefully we should be able to install the beefy swaybar, the temp sender, and the rear shocks next week.

Wednesday, October 28, 2009

Pick n Pull - Picture Pages Edition

Because Duff's post were full of only words and therefore boring and because Bill Cosby rocks, the never asked for Picture Pages Racing 4 Nickels Blog Entry

So we went to the summit Pick n Pull and saw lots and lots of cars



Some of course were picked over more than others



Some would make great LeMons cars by name alone, let alone the fact that they look goofy and even though branded as a Pontiac is actually a Daewoo.



So we went to work in this wonderland of cars, starting at white Cutlass



Where we quickly went to taking the rear shocks, and the 43 cents we found inside.



Then we went to visit the little blue wagon we had taken the instrument cluster from the week before.



Where you can see our handy work with the vice grips



Then we went to see a celebrity wagon



But not just any type of Celebrity Wagon



Where we took its front sway bar, the beefy f41 kind. Since a couple nuts would cooperate, Mr Duffy went a bit nuts with the hammer



And then we went home with our new parts.

The End?

Monday, October 26, 2009

Return to the Pick N Pull

So Bob and I ventured back to the Pick N Pull Sunday morning to get some more parts for our car. Armed with a breaker bar and an assortment of other tools we were able to get a few more of the parts we needed, like the larger front sway bar from the Celeberity Eurosport and some like new looking  rear shocks from a 90's Ciera SL.
We also came away with a transcooler that we should be able to connect right up to the existing transmission lines. It is hard to tell how many passes the transcooler is but I believe it is still leaking out trans fluid as I write this.
We looked for a temp sender so we can get the temp gauge working but it looks like we may have to get that new since it was only on our engine for 2 model years. We are also still looking for an engine oil cooler but those seem harder to come by.

After we were done at the Pick N Pull we stoped at O'Reilly auto parts a got the part we need to fix the power steering leak.

Over all it was a good day of parts gathering and we are now about $260 in to the $500 car parts budget.

Some bonus things we came away with from the Pick N Pull were an old police billy club, some 2.8L badges off of the Eurosport and about $0.36 we found when removing the back seat of a Ciera SL so we could get to the shocks.

Bob did take some pictures and we will get those posted sometime soon.

Monday, October 19, 2009

Pick N Pull

So Bob and I went down to the local Pick N Pull on Sunday just to check it out.  We asked if they any any cars with parts for our '89 Ciera and the computer told them no. We decided to go wander the lot anyway so we paid the $2 each and wondered out in to the yard.

It was strange to see all of those cars up on blocks, there to donate their parts before going to the big scrapyard in the sky.

We did endup finding some potential parts cars, Most of them were early 90 Ciera's, we also found an old Celebrity Eurosport.  The Eurosport has the front sway bar that we want but the bolts were so rusted we couldn't get it removed. We did end up spraying it with penetrating oil and plan to go back with some better tools to try and remove it.

One thing we did come away with was an upgraded gauge cluster, that has a temp indicator. We removed it from a 92 Ciera.  When we got back we installed in in our '89 and every thing except the temp gauge is working,  we think we may have to get a different temp probe to send the correct info.

There were alot of GM cars with oil and trans coolers, we hope to pick up one of each when we go back. 

Over all it was a good experience and we have a better understanding of what is available. Hopefully we will go back next week and return with more parts.